Original file

Fiat Tipo Egea Bosch EDC17C69 0281031204 / 1037560050

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Tipo Egea, hardware number 0281031204 and software number 1037560050, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo Egea1.6 diesel 120PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031204
Software number
1037560050
Bosch part / software
10SW024048
Vehicle maker's hardware number
55265162
Software / calibration
P_1619_EDC17C69_G10D_V1

Technical data

Vehicle
BrandFiat
Car modelTipo Egea
Engine1.6 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number1037560050
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf4a2dedc4f56e37f
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW024048Offset in the file: 0x02001A
Vehicle maker's hardware number55265162Offset in the file: 0x3D4219
Software / calibrationP_1619_EDC17C69_G10D_V1Offset in the file: 0x1EECC0
Internal build string11B.13.02.00RBOffset in the file: 0x0129F8
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G10D_C69//P_1619_EDC17C69_G10D_V1///Offset in the file: 0x1EECC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037560050. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Jeep RenegadeFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Fiat TipoFlash4,096.00 KB€15Add to cart
Jeep Renegade 2.0 MultiJetFlash4,096.00 KB€15Add to cart
Fiat Tipo 1.6 JTDMFlash4,096.00 KB€15Add to cart
Fiat 500X 2.0 MultiJetFlash4,096.00 KB€15Add to cart
Fiat Tipo 1.6 MjetFlash4,096.00 KB€15Add to cart

All reads of 0281031204 / 1037560050

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037558827Jeep Renegade 2.0 MultiJet
02810312041037558828Jeep Renegade
02810312041037559985Jeep Renegade 2.0 MultiJet
02810312041037559986Jeep Renegade
02810312041037560821Fiat Toro
02810312041037560829Chrysler Jeep Renegade, Chrysler Renegade, Jeep
02810312041037561176Jeep Renagade
02810312041037561188Fiat 500X, Fiat 500, Fiat 500x

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page