Original file

Jeep Renegade Bosch EDC17C69 0281031204 / 1037561652

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Renegade, hardware number 0281031204 and software number 1037561652, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegade2.0 diesel 170PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031204
Software number
1037561652
Vehicle maker's hardware number
55265162
Software / calibration
P_1618_EDC17C69_G06F_V0

Technical data

Vehicle
BrandJeep
Car modelRenegade
Engine2.0 diesel 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number1037561652
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3f89cbb2fb135079
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037561652Offset in the file: 0x02001A
Vehicle maker's hardware number55265162Offset in the file: 0x3EACD8
Software / calibrationP_1618_EDC17C69_G06F_V0Offset in the file: 0x1CE634
Internal build string11B.13.02.00RBOffset in the file: 0x0129F8
Bosch project identifier (EPK)61/1/EDC17C69/1618/P1618_G06F_C69//P_1618_EDC17C69_G06F_V0///Offset in the file: 0x1CE634

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037561652. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Chrysler Jeep RenegadeFlash2,048.00 KB€15Add to cart
Jeep RenegadeFlash4,096.00 KB€15Add to cart

All reads of 0281031204 / 1037561652

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037561452Jeep Renegade, Jeep Renegade, Jeep Renegade 2.0 MultiJet
02810312041037561453Fiat 500L
02810312041037561455Jeep Renegade, Jeep Renegade 2.0 MultiJet
02810312041037561651Jeep Renegade
02810312041037561654Fiat 500X 2.0 MultiJet, Fiat 500
02810312041037563002Jeep Renegade, Jeep Compass
028103120410SW002892Fiat 500 / 595 / 695
028103120410SW002935Fiat Stilo

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page