Original file

Jeep Renegade Bosch EDC17C69 0281031204 / 1037563002

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Renegade, hardware number 0281031204 and software number 1037563002, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegadepetrol 168PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031204
Software number
1037563002
Vehicle maker's hardware number
55265162
Software / calibration
P_1619_EDC17C69_G115_V2

Technical data

Vehicle
BrandJeep
Car modelRenegade
Enginepetrol 168PS
Displacement2.0
Power168.0PS / 123.6kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number1037563002
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydd482e92905cfb3b
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037563002Offset in the file: 0x02001A
Vehicle maker's hardware number55265162Offset in the file: 0x3D8331
Software / calibrationP_1619_EDC17C69_G115_V2Offset in the file: 0x1EF744
Internal build string11B.13.02.00RBOffset in the file: 0x0129F8
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G115_C69//P_1619_EDC17C69_G115_V2///Offset in the file: 0x1EF744

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037563002. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jeep CompassFlash4,096.00 KB€15Add to cart

All reads of 0281031204 / 1037563002

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037561455Jeep Renegade, Jeep Renegade 2.0 MultiJet
02810312041037561651Jeep Renegade
02810312041037561652Jeep Renegade, Jeep Renegade, Chrysler
02810312041037561654Fiat 500X 2.0 MultiJet, Fiat 500
028103120410SW002892Fiat 500 / 595 / 695
028103120410SW002935Fiat Stilo
028103120410SW015363Fiat 500
028103120410SW015518Jeep Renegade

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page