Original file

Fiat Stilo Bosch EDC17C69 0281031204 / 10SW002935

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Stilo, hardware number 0281031204 and software number 10SW002935, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Stilo1.6 petrol 120PS
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031204
Software number
10SW002935
Vehicle maker's hardware number
55265162
Software / calibration
P_1619_EDC17C69_G10B_V1

Technical data

Vehicle
BrandFiat
Car modelStilo
Engine1.6 petrol 120PS
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number10SW002935
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0a8ceafa38be1388
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW002935Offset in the file: 0x04001A
Vehicle maker's hardware number55265162Offset in the file: 0x1D41D9
Software / calibrationP_1619_EDC17C69_G10B_V1Offset in the file: 0x1D7E6C
Internal build string11B.16.19.16RBOffset in the file: 0x1D418A
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G10B_C69//P_1619_EDC17C69_G10B_V1///Offset in the file: 0x1D7E6C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 10SW002935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037561652Jeep Renegade, Jeep Renegade, Chrysler
02810312041037561654Fiat 500X 2.0 MultiJet, Fiat 500
02810312041037563002Jeep Renegade, Jeep Compass
028103120410SW002892Fiat 500 / 595 / 695
028103120410SW015363Fiat 500
028103120410SW015518Jeep Renegade
028103120410SW015520Chrysler Renegade
028103120410SW015599Jeep Renegade

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page