Original file

Fiat 500 Bosch EDC17C69 0281031204 / 10SW015363

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat 500, hardware number 0281031204 and software number 10SW015363, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.6 diesel 120PS
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031204
Software number
10SW015363
Vehicle maker's hardware number
55265162
Software / calibration
P_1618_EDC17C69_G07A_V0

Technical data

Vehicle
BrandFiat
Car model500
Engine1.6 diesel 120PS
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number10SW015363
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyaa8a70a547f45144
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW015363Offset in the file: 0x04001A
Vehicle maker's hardware number55265162Offset in the file: 0x1EACD8
Software / calibrationP_1618_EDC17C69_G07A_V0Offset in the file: 0x1EE854
Internal build string11B.16.18.71RBOffset in the file: 0x1EAC8A
Bosch project identifier (EPK)61/1/EDC17C69/1618/P1618_G07A_C69//P_1618_EDC17C69_G07A_V0///Offset in the file: 0x1EE854

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 10SW015363. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037561654Fiat 500X 2.0 MultiJet, Fiat 500
02810312041037563002Jeep Renegade, Jeep Compass
028103120410SW002892Fiat 500 / 595 / 695
028103120410SW002935Fiat Stilo
028103120410SW015518Jeep Renegade
028103120410SW015520Chrysler Renegade
028103120410SW015599Jeep Renegade
028103120410SW015727Jeep Renegade

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page