Original file
Fiat Tipo Bosch EDC17C69 0281031204 / 10SW024046
An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Tipo, hardware number 0281031204 and software number 10SW024046, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Fiat Tipo1.6 diesel · 115.0PS / 84.6kW
- Control unit
- Bosch EDC17C69
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 0281031204
- Software number
- 10SW024046
- Vehicle maker's hardware number
- 55265162
- Software / calibration
- P_1619_EDC17C69_G10D_V1
Technical data
| Brand | Fiat |
|---|---|
| Car model | Tipo |
| Engine | 1.6 diesel |
| Power | 115.0PS / 84.6kW |
| Control unit | Bosch EDC17C69 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281031204 |
| Software number | 10SW024046 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 1f0b1670e75db854 |
| ECU name | EDC17C69 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW024046 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | 55265162 | Offset in the file: 0x1D4219 |
| Software / calibration | P_1619_EDC17C69_G10D_V1 | Offset in the file: 0x1D7EAC |
| Internal build string | 11B.16.19.14RB | Offset in the file: 0x1D41CA |
| Bosch project identifier (EPK) | 61/1/EDC17C69/1619/P1619_G10D_C69//P_1619_EDC17C69_G10D_V1/// | Offset in the file: 0x1D7EAC |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 10SW024046. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C69
| Hardware | Software | Vehicles |
|---|---|---|
| 0281031204 | 10SW015599 | Jeep Renegade |
| 0281031204 | 10SW015727 | Jeep Renegade |
| 0281031204 | 10SW015918 | Jeep Renegade |
| 0281031204 | 10SW021222 | Fiat Tipo |
| 0281031204 | 10SW024048 | Fiat Tipo |
| 0281031204 | 10SW034098 1618G07C | Jeep Renegade 2.0 MultiJet |
| 0281031204 | 10SW035210 | Jeep Renegade |
| 0281031204 | 10SW035534 | Fiat Tipo |