Original file

Chrysler Jeep Wrangler Bosch EDC17C69 0281032454 / 010851

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Chrysler Jeep Wrangler, hardware number 0281032454 and software number 010851, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Wrangler2.8 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281032454
Software number
010851
Bosch part / software
10SW010851
Software / calibration
P_1404_EDC17C69_J145_1

Technical data

Vehicle
BrandChrysler
Car modelJeep Wrangler
Engine2.8 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281032454
Software number010851
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key64f86d8062ea008b
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW010851Offset in the file: 0x04001A
Software / calibrationP_1404_EDC17C69_J145_1Offset in the file: 0x04023C
Bosch project identifier (EPK)51/1/EDC17C69/1404/P1404//P_1404_EDC17C69_J145_1///Offset in the file: 0x04023C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281032454 and software number 010851. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103222410SW021313Alfa Romeo Giulia, Alfa Romeo Giulietta
0281032339002900Fiat
0281032339060767Fiat Doblo
0281032340552765Fiat Bravo
02810324621037557610Alfa Romeo Giulia
02810324621037560067Alfa Romeo Giulia, Alfa Romeo 75, Alfa Romeo 5 Serie - Sedan
02810324621037560824Alfa Romeo Giulia
02810324621037560825Alfa Romeo Giulia

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page