Original file

Alfa Romeo Giulietta Bosch EDC17C69 0281032993 / 10SW015402

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Alfa Romeo Giulietta, hardware number 0281032993 and software number 10SW015402, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alfa Romeo Giulietta1.6 diesel · 120.1PS / 88.3kW
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281032993
Software number
10SW015402
Vehicle maker's hardware number
55283371
Software / calibration
P_1264_EDC17C69_B117_V2

Technical data

Vehicle
BrandAlfa Romeo
Car modelGiulietta
Engine1.6 diesel
Power120.1PS / 88.3kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281032993
Software number10SW015402
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya9602b307dac1fb2
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW015402Offset in the file: 0x20001A
Vehicle maker's hardware number55283371Offset in the file: 0x1A4F9A
Software / calibrationP_1264_EDC17C69_B117_V2Offset in the file: 0x1A92C8
Internal build string11B.11.05.00RBOffset in the file: 0x0127D8
Bosch project identifier (EPK)61/1/EDC17C69/1264/P1264_B117_C69//P_1264_EDC17C69_B117_V2///Offset in the file: 0x1A92C8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281032993 and software number 10SW015402. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page