Original file

Alfa Romeo Stelvio Bosch EDC17C69 0281033903 / 015111

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Alfa Romeo Stelvio, hardware number 0281033903 and software number 015111, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alfa Romeo Stelvio2.2 diesel
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281033903
Software number
015111
Bosch part / software
10SW021276
Vehicle maker's hardware number
52078811
Software / calibration
P_1619_EDC17C69_G141_V3

Technical data

Vehicle
BrandAlfa Romeo
Car modelStelvio
Engine2.2 diesel
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281033903
Software number015111
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye399aa5a62688187
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW021276Offset in the file: 0x20001A
Vehicle maker's hardware number52078811Offset in the file: 0x160C81
Software / calibrationP_1619_EDC17C69_G141_V3Offset in the file: 0x16570C
Internal build string11B.13.06.00RBOffset in the file: 0x01304C
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G141_C69//P_1619_EDC17C69_G141_V3///Offset in the file: 0x16570C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281033903 and software number 015111. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103358210SW040531Jeep Compass
02810337631037560813Fiat Ducato
02810337631037561443Fiat Ducato, Fiat Doblo, Fiat Ducato III
028103376310SW015075Fiat Ducato
0281033903021339Alfa Romeo Stelvio
028103390310SW021276Alfa Romeo Stelvio
028103390310SW021339Alfa Romeo Stelvio
028103390310SW021588Alfa Romeo Stelvio

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page