Original file

Fiat Tipo 2019y Bosch EDC17C69 0281035022 / 10SW031423

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Tipo 2019y, hardware number 0281035022 and software number 10SW031423, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo 2019y1.6 diesel
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281035022
Software number
10SW031423
Bosch part / software
10SW049156
Vehicle maker's hardware number
46338313
Software / calibration
P_1619_EDC17C69_G197_V0

Technical data

Vehicle
BrandFiat
Car modelTipo 2019y
Engine1.6 diesel
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281035022
Software number10SW031423
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFiat Tipo 2019y 1.6 JTD
File key6c2d846d744855ae
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW049156Offset in the file: 0x02001A
Vehicle maker's hardware number46338313Offset in the file: 0x3F3AB5
Software / calibrationP_1619_EDC17C69_G197_V0Offset in the file: 0x1F7A08
Internal build string11B.13.07.00RBOffset in the file: 0x01304C
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G197_C69//P_1619_EDC17C69_G197_V0///Offset in the file: 0x1F7A08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281035022 and software number 10SW031423. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat Tipo 2019yFlash · From the file name: Fiat Tipo 2019y 1.6 JTD4,096.00 KB€15Add to cart

All reads of 0281035022 / 10SW031423

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
0281035022051073Fiat Tipo
0281035022051113Jeep Renegade
0281035022066349Fiat 500X
028103502210SW030757Jeep
028103502210SW040966Jeep Renegade
028103502210SW042301Fiat 500X
028103502210SW049156Jeep Renegade
028103502210SW049284Jeep Renegade

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page