Original file

Jeep Renegade Bosch EDC17C69 0281035022 / 10SW040966

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Renegade, hardware number 0281035022 and software number 10SW040966, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegade2.0 diesel 140PS
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281035022
Software number
10SW040966
Vehicle maker's hardware number
46338313
Software / calibration
P_1619_EDC17C69_G192_V0

Technical data

Vehicle
BrandJeep
Car modelRenegade
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281035022
Software number10SW040966
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc066563db2a7e028
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW040966Offset in the file: 0x08001A
Vehicle maker's hardware number46338313Offset in the file: 0x1F341D
Software / calibrationP_1619_EDC17C69_G192_V0Offset in the file: 0x1F7BFC
Internal build string11B.16.19.02RBOffset in the file: 0x1F33CE
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G192_C69//P_1619_EDC17C69_G192_V0///Offset in the file: 0x1F7BFC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281035022 and software number 10SW040966. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
0281035022051113Jeep Renegade
0281035022066349Fiat 500X
028103502210SW030757Jeep
028103502210SW031423Fiat Tipo 2019y
028103502210SW042301Fiat 500X
028103502210SW049156Jeep Renegade
028103502210SW049284Jeep Renegade
028103502210SW049733Fiat Tipo

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page