Original file

Jeep Compass Bosch EDC17C69 0281035168 / 10SW058578

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Compass, hardware number 0281035168 and software number 10SW058578, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Compass2.0
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281035168
Software number
10SW058578
Software / calibration
P_1619_EDC17C69_G197_V0

Technical data

Vehicle
BrandJeep
Car modelCompass
Engine2.0
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281035168
Software number10SW058578
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8f36ea94b933f3da
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW058578Offset in the file: 0x02001A
Software / calibrationP_1619_EDC17C69_G197_V0Offset in the file: 0x1F7A08
Internal build string11B.13.07.00RBOffset in the file: 0x01304C
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G197_C69//P_1619_EDC17C69_G197_V0///Offset in the file: 0x1F7A08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281035168 and software number 10SW058578. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103516810SW054291Jeep Compass
028103516810SW054291 1619G197Jeep Compass 2.0 R4 CRD
028103516810SW054446Jeep Compass
028103516810SW058305Jeep Compass
028103516810SW058579Jeep Compass
028103584710SW038632Fiat Doblo
028103603910SW041027Fiat Doblo
028103603910SW068373Fiat Doblo

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page