Original file

Fiat Doblo Bosch EDC17C69 0281036039 / 10SW068373

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Doblo, hardware number 0281036039 and software number 10SW068373, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblodiesel
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281036039
Software number
10SW068373
Vehicle maker's hardware number
46349634
Software / calibration
P_1264_EDC17C69_B194_V0

Technical data

Vehicle
BrandFiat
Car modelDoblo
Enginediesel
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281036039
Software number10SW068373
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6eab5885bafcd8e1
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW068373Offset in the file: 0x20001A
Vehicle maker's hardware number46349634Offset in the file: 0x1A220B
Software / calibrationP_1264_EDC17C69_B194_V0Offset in the file: 0x1A6664
Internal build string11B.11.08.00RBOffset in the file: 0x012968
Bosch project identifier (EPK)61/1/EDC17C69/1264/P1264_B194_C69//P_1264_EDC17C69_B194_V0///Offset in the file: 0x1A6664

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281036039 and software number 10SW068373. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103516810SW058578Jeep Compass
028103516810SW058579Jeep Compass
028103584710SW038632Fiat Doblo
028103603910SW041027Fiat Doblo
028103606910SW067887Fiat Doblo
0281036070067886Fiat
028103607010SW051761Fiat Doblo, Fiat Ducato
028103607010SW067886Fiat Doblo, Fiat Doblo 2021y

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page