Original file

Jeep Compass Bosch EDC17C69 0281037068 / 10SW098094

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Compass, hardware number 0281037068 and software number 10SW098094, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Compass
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281037068
Software number
10SW098094
Vehicle maker's hardware number
46346613
Software / calibration
P_1619_EDC17C69_G290_IM32_V9

Technical data

Vehicle
BrandJeep
Car modelCompass
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281037068
Software number10SW098094
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7829d869971723bf
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW098094Offset in the file: 0x20001A
Vehicle maker's hardware number46346613Offset in the file: 0x1B3F71
Software / calibrationP_1619_EDC17C69_G290_IM32_V9Offset in the file: 0x1B7AE4
Internal build string11B.13.08.00RBOffset in the file: 0x01310C
Bosch project identifier (EPK)71/1/EDC17C69/1619/P1619_G290_IM32_C69//P_1619_EDC17C69_G290_IM32_V9///Offset in the file: 0x1B7AE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281037068 and software number 10SW098094. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
0281036887068218Fiat Doblo
028103706810SW074921Jeep Compass
028103706810SW074925Fiat Tipo Egea
028103706810SW079121Fiat Tipo
028103706910SW083211Alfa Romeo Stelvio
028103706910SW083214Alfa Romeo Stelvio
028103706910SW099039Alfa Romeo Stelvio
028103912410SW094872Fiat Toro

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page