Original file

Fiat Toro Bosch EDC17C69 0281039124 / 10SW094872

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Toro, hardware number 0281039124 and software number 10SW094872, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Toro2.0 170PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281039124
Software number
10SW094872
Vehicle maker's hardware number
46351254
Software / calibration
P_1619_EDC17C69_G1E1_V5

Technical data

Vehicle
BrandFiat
Car modelToro
Engine2.0 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281039124
Software number10SW094872
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key11917804fa0c9d7b
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW094872Offset in the file: 0x02001A
Vehicle maker's hardware number46351254Offset in the file: 0x3F5311
Software / calibrationP_1619_EDC17C69_G1E1_V5Offset in the file: 0x1FCC54
Internal build string11B.13.07.00RBOffset in the file: 0x01304C
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G1E1_C69//P_1619_EDC17C69_G1E1_V5///Offset in the file: 0x1FCC54

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281039124 and software number 10SW094872. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103706810SW098094Jeep Compass
028103706910SW083211Alfa Romeo Stelvio
028103706910SW083214Alfa Romeo Stelvio
028103706910SW099039Alfa Romeo Stelvio
028103929710SW084481Fiat Doblo
028103930610SW082141Fiat
03408001011037556304Iveco Daily
039829165810SW039829Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page