Original file

Fiat Doblo Bosch EDC17C69 0281039297 / 10SW084481

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat Doblo, hardware number 0281039297 and software number 10SW084481, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblo1.6 120HP
Control unit
Bosch EDC17C69
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281039297
Software number
10SW084481
Vehicle maker's hardware number
46353567
Software / calibration
P_1264_EDC17C69_B270_V5

Technical data

Vehicle
BrandFiat
Car modelDoblo
Engine1.6 120HP
FuelDiesel
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281039297
Software number10SW084481
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7d98c520840bd23e
Identification read from the file
ECU nameEDC17C69
Read typeOBD read (no boot area)
Bosch part / software10SW084481Offset in the file: 0x1C001A
Vehicle maker's hardware number46353567Offset in the file: 0x1AD247
Software / calibrationP_1264_EDC17C69_B270_V5Offset in the file: 0x1B0984
Internal build string11B.12.64.12RBOffset in the file: 0x1AD1F8
Bosch project identifier (EPK)61/1/EDC17C69/1264/P1264_B270_C69//P_1264_EDC17C69_B270_V5///Offset in the file: 0x1B0984

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281039297 and software number 10SW084481. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
028103706910SW083211Alfa Romeo Stelvio
028103706910SW083214Alfa Romeo Stelvio
028103706910SW099039Alfa Romeo Stelvio
028103912410SW094872Fiat Toro
028103930610SW082141Fiat
03408001011037556304Iveco Daily
039829165810SW039829Jeep Wrangler
046266165810SW046266Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page