Original file

Jeep Wrangler Bosch EDC17C69 0398291658 / 10SW039829

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Wrangler, hardware number 0398291658 and software number 10SW039829, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.2 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0398291658
Software number
10SW039829
Software / calibration
P_1658_EDC17C69_R05A

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.2 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0398291658
Software number10SW039829
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0d1b501736fbc602
Identification read from the file
ECU nameEDC17C69
Read typeOBD read (no boot area)
Bosch part / software10SW039829Offset in the file: 0x1C001A
Software / calibrationP_1658_EDC17C69_R05AOffset in the file: 0x0202FC
Bosch project identifier (EPK)49/1/EDC17C69/1658/P1658//P_1658_EDC17C69_R05A///Offset in the file: 0x0202FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0398291658 and software number 10SW039829. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page