Original file

Jeep Grand Cherokee Bosch EDC17C69 0765061502 / 10SW076506

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Grand Cherokee, hardware number 0765061502 and software number 10SW076506, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel · 265.0PS / 194.9kW
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0765061502
Software number
10SW076506
Software / calibration
P_1502_EDC17C69_K170

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel
Power265.0PS / 194.9kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0765061502
Software number10SW076506
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4cd8e950c6d9b806
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW076506Offset in the file: 0x20001A
Software / calibrationP_1502_EDC17C69_K170Offset in the file: 0x020304
Internal build string11B.11.02.00RBOffset in the file: 0x012950
Bosch project identifier (EPK)49/1/EDC17C69/1502/P1502//P_1502_EDC17C69_K170///Offset in the file: 0x020304

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0765061502 and software number 10SW076506. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
039829165810SW039829Jeep Wrangler
046266165810SW046266Jeep Wrangler
047920150210SW0559901502K141Dodge
066428170410SW066428Iveco Daily 3.0d
076506150210SW085733Jeep Grand Cherokee
076506150210SW086065Jeep Grand Cherokee
10SW006334P140J141006334Jeep Wrangler
10SW006334P140J14110SW006334Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page