Original file

Jeep Wrangler Bosch EDC17C69 10SW012496P140J145 / 012496

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Wrangler, hardware number 10SW012496P140J145 and software number 012496, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.8 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
10SW012496P140J145
Software number
012496
Bosch part / software
10SW012496
Software / calibration
P_1404_EDC17C69_J145_1

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.8 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number10SW012496P140J145
Software number012496
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key43cc68b8d3286a2a
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW012496Offset in the file: 0x04001A
Software / calibrationP_1404_EDC17C69_J145_1Offset in the file: 0x04023C
Bosch project identifier (EPK)51/1/EDC17C69/1404/P1404//P_1404_EDC17C69_J145_1///Offset in the file: 0x04023C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW012496P140J145 and software number 012496. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
076506150210SW085733Jeep Grand Cherokee
076506150210SW086065Jeep Grand Cherokee
10SW006334P140J141006334Jeep Wrangler
10SW006334P140J14110SW006334Jeep Wrangler
33920-55P01037551229Suzuki SX4, Suzuki Vitara
58019192811037556304Iveco Daily
68256850AA10SW085733Jeep Gladiator
68275933AA10SW006334Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page