Original file

Jeep Gladiator Bosch EDC17C69 68256850AA / 10SW085733

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Gladiator, hardware number 68256850AA and software number 10SW085733, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Gladiator3.0 diesel 264PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
68256850AA
Software number
10SW085733
Software / calibration
P_1502_EDC17C69_K172

Technical data

Vehicle
BrandJeep
Car modelGladiator
Engine3.0 diesel 264PS
Power264.0PS / 194.2kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number68256850AA
Software number10SW085733
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3b77fe57524af0b6
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW085733Offset in the file: 0x20001A
Software / calibrationP_1502_EDC17C69_K172Offset in the file: 0x020304
Internal build string11B.11.02.00RBOffset in the file: 0x012950
Bosch project identifier (EPK)49/1/EDC17C69/1502/P1502//P_1502_EDC17C69_K172///Offset in the file: 0x020304

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68256850AA and software number 10SW085733. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jeep GladiatorFlash4,096.00 KB€15Add to cart

All reads of 68256850AA / 10SW085733

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
10SW006334P140J14110SW006334Jeep Wrangler
10SW012496P140J145012496Jeep Wrangler
33920-55P01037551229Suzuki SX4, Suzuki Vitara
58019192811037556304Iveco Daily
68275933AA10SW006334Jeep Wrangler
68299880AC10SW006334Jeep Wrangler
68309538AH68335791AAJeep Wrangler
68309538AJ10SW048952Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page