Original file

Jeep Wrangler Bosch EDC17C69 68309539AK / 68335791AA

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Wrangler, hardware number 68309539AK and software number 68335791AA, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.2 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
68309539AK
Software number
68335791AA
Bosch part / software
10SW050235
Software / calibration
P_1658_EDC17C69_R064

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.2 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number68309539AK
Software number68335791AA
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycca18e79c8da55c0
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW050235Offset in the file: 0x20001A
Software / calibrationP_1658_EDC17C69_R064Offset in the file: 0x0202FC
Internal build string11B.11.02.00RBOffset in the file: 0x0127C0
Bosch project identifier (EPK)49/1/EDC17C69/1658/P1658//P_1658_EDC17C69_R064///Offset in the file: 0x0202FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68309539AK and software number 68335791AA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
68309538AH68335791AAJeep Wrangler
68309538AJ10SW048952Jeep Wrangler
68309539AH68335791AAJeep Wrangler
68309539AI68335791AAJeep Wrangler
68335791AA10SW038519Jeep Wrangler
68335791AA10SW039828Chrysler Jeep Wrangler
68335791AB10SW048954Jeep Wrangler
68335791AB10SW050236Jeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page