Original file

Chrysler Jeep Wrangler Bosch EDC17C69 68335791AA / 10SW039828

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Chrysler Jeep Wrangler, hardware number 68335791AA and software number 10SW039828, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Wrangler2.2 diesel 200PS
Control unit
Bosch EDC17C69
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
68335791AA
Software number
10SW039828
Software / calibration
P_1658_EDC17C69_R05A

Technical data

Vehicle
BrandChrysler
Car modelJeep Wrangler
Engine2.2 diesel 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number68335791AA
Software number10SW039828
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd92ffdf277a71ce0
Identification read from the file
ECU nameEDC17C69
Read typeOBD read (no boot area)
Bosch part / software10SW039828Offset in the file: 0x1C001A
Software / calibrationP_1658_EDC17C69_R05AOffset in the file: 0x0202FC
Bosch project identifier (EPK)49/1/EDC17C69/1658/P1658//P_1658_EDC17C69_R05A///Offset in the file: 0x0202FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68335791AA and software number 10SW039828. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
68309539AH68335791AAJeep Wrangler
68309539AI68335791AAJeep Wrangler
68309539AK68335791AAJeep Wrangler
68335791AA10SW038519Jeep Wrangler
68335791AB10SW048954Jeep Wrangler
68335791AB10SW050236Jeep Wrangler
68335791AB68403765AGJeep Wrangler
A085320W6LR00BFI0B450P021037556304Iveco Daily

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page