Original file

Chrysler Jeep Wrangler Bosch EDC17C69 RAJKGXE6J145CM484F / 68343599AA

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Chrysler Jeep Wrangler, hardware number RAJKGXE6J145CM484F and software number 68343599AA, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Wrangler2.8 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
RAJKGXE6J145CM484F
Software number
68343599AA
Bosch part / software
10SW010404
Software / calibration
P_1404_EDC17C69_J145_1

Technical data

Vehicle
BrandChrysler
Car modelJeep Wrangler
Engine2.8 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware numberRAJKGXE6J145CM484F
Software number68343599AA
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc5085255b89667f0
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW010404Offset in the file: 0x02001A
Software / calibrationP_1404_EDC17C69_J145_1Offset in the file: 0x05F478
Internal build string11B.11.02.00RBOffset in the file: 0x00E580
Bosch project identifier (EPK)51/1/EDC17C69/1404/P1404//P_1404_EDC17C69_J145_1///Offset in the file: 0x05F478

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number RAJKGXE6J145CM484F and software number 68343599AA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Chrysler Jeep WranglerFlash2,048.00 KB€15Add to cart

All reads of RAJKGXE6J145CM484F / 68343599AA

Other pairs of Bosch EDC17C69

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page