Original file

Ford C-Max Bosch EDC17C70 F1D1-12A650-AFA / 1037557797

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford C-Max, hardware number F1D1-12A650-AFA and software number 1037557797, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford C-Max1.5 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
F1D1-12A650-AFA
Software number
1037557797
Software / calibration
F1F1-12B684-AD

Technical data

Vehicle
BrandFord
Car modelC-Max
Engine1.5 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberF1D1-12A650-AFA
Software number1037557797
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyaa8fa02739cacb81
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software1037557797Offset in the file: 0x02001A
Vehicle maker's hardware numberF1D1-12A650-AFAOffset in the file: 0x00FD30
Software / calibrationF1F1-12B684-ADOffset in the file: 0x00FD00
Engine descriptionF1D1-14C204-AFAOffset in the file: 0x1FFF02
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C540///Offset in the file: 0x298FD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1D1-12A650-AFA and software number 1037557797. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page