Original file

Ford Focus Bosch EDC17C70 F1F1-12A650-UB / 1037560350

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Focus, hardware number F1F1-12A650-UB and software number 1037560350, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.5 120PS
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
F1F1-12A650-UB
Software number
1037560350
Vehicle maker's hardware number
F1F1-12A650-SA
Software / calibration
F1F1-14C204-UB

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.5 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberF1F1-12A650-UB
Software number1037560350
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycaca401ebd5b4512
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software1037560350Offset in the file: 0x08001A
Vehicle maker's hardware numberF1F1-12A650-SAOffset in the file: 0x16D8CB
Software / calibrationF1F1-14C204-UBOffset in the file: 0x16D937
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C540///Offset in the file: 0x098FD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1F1-12A650-UB and software number 1037560350. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
F1F1-12A650-RF10SW058150Ford Focus
F1F1-12A650-SA1037557779Ford Focus
F1F1-12A650-SA1037557809Ford Connect 2018y 1.5TDCI
F1F1-12A650-TA1037557778Ford Focus
F1F1-12A650-YA1037557863Ford Focus
F1F1-12B684-ZAPN1037560305Ford Fiesta 75 HP
F1F1-14C204-JH1037546131Ford Focus 1.5 TDCI
F1F1-14C204-KJ1037541306Ford Focus

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page