Original file

Ford Transit Courier Bosch EDC17C70 FT7A-14C204-UD / 10SW060185

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Transit Courier, hardware number FT7A-14C204-UD and software number 10SW060185, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Courier1.5 diesel
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
FT7A-14C204-UD
Software number
10SW060185
Vehicle maker's hardware number
FT7A-12A650-UD

Technical data

Vehicle
BrandFord
Car modelTransit Courier
Engine1.5 diesel
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberFT7A-14C204-UD
Software number10SW060185
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9215c3a1b64b0613
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW060185Offset in the file: 0x28001A
Vehicle maker's hardware numberFT7A-12A650-UDOffset in the file: 0x368FB1
Software / calibrationFT7A-14C204-UDOffset in the file: 0x368F7F
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084B//P1084B722///Offset in the file: 0x299348

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FT7A-14C204-UD and software number 10SW060185. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page