Original file

Ford Transit Courier Bosch EDC17C70 FT7A-14C204-UD / FT7A-14C204-UD

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Transit Courier, hardware number FT7A-14C204-UD and software number FT7A-14C204-UD, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Courier1.5 diesel · 95.0PS / 69.9kW
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
FT7A-14C204-UD
Software number
FT7A-14C204-UD
Bosch part / software
10SW060185
Vehicle maker's hardware number
FT7A-12A650-UD

Technical data

Vehicle
BrandFord
Car modelTransit Courier
Engine1.5 diesel
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberFT7A-14C204-UD
Software numberFT7A-14C204-UD
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycfcd361e7a37b2a0
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW060185Offset in the file: 0x28001A
Vehicle maker's hardware numberFT7A-12A650-UDOffset in the file: 0x368FB1
Software / calibrationFT7A-14C204-UDOffset in the file: 0x368F7F
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084B//P1084B722///Offset in the file: 0x299348

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FT7A-14C204-UD and software number FT7A-14C204-UD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford Transit CourierFlash2,048.00 KB€15Add to cart

All reads of FT7A-14C204-UD / FT7A-14C204-UD

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
FT7A-14C204-UC1037557963Ford Connect
FT7A-14C204-UC10SW048327Ford Transit
FT7A-14C204-UD1037557963Ford Transit Courier
FT7A-14C204-UD10SW060185Ford Transit Courier
FV1A-14C204-LJFV1A-14C204-LJFord B-Max
FV1A-14C204-RB1037557965Ford B-Max
FV61-12A650-PD1037556177Ford Tourneo
FV61-12A650-RD1037556178Ford Tourneo, Ford Tourneo Connect

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page