Original file

Ford Tourneo Bosch EDC17C70 FV61-14C204-AZF / 10SW061896

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Tourneo, hardware number FV61-14C204-AZF and software number 10SW061896, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo1.5 diesel 100PS
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
FV61-14C204-AZF
Software number
10SW061896
Vehicle maker's hardware number
FV61-12A650-AZF

Technical data

Vehicle
BrandFord
Car modelTourneo
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberFV61-14C204-AZF
Software number10SW061896
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycb7c13d1c248e0d9
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW061896Offset in the file: 0x28001A
Vehicle maker's hardware numberFV61-12A650-AZFOffset in the file: 0x36D9D5
Software / calibrationFV61-14C204-AZFOffset in the file: 0x36D9A3
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C545///Offset in the file: 0x298FAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FV61-14C204-AZF and software number 10SW061896. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
FV61-14C204-ASE10SW046929Ford Tourneo
FV61-14C204-AXA1037559173Ford Transit, Ford Transit Connect
FV61-14C204-AYA1037559174Ford Tourneo, Ford Transit
FV61-14C204-AYB1037559174Ford Transit Connect
FV61-14C204-BBB1037559176Ford Fiesta
FV61-14C204-BFA10SW015412Ford Transit
FV61-14C204-BFAFV61-12A650-BFAFord Transit Connect
FV61-14C204-BFB10SW015461Ford Tourneo

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page