Original file

Ford Tourneo Bosch EDC17C70 FV61-14C204-BFB / 10SW015461

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Tourneo, hardware number FV61-14C204-BFB and software number 10SW015461, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo1.5 diesel 99PS
Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
FV61-14C204-BFB
Software number
10SW015461
Bosch part / software
10SW027110
Vehicle maker's hardware number
GV61-12A650-RB
Software / calibration
F1F1-12B684-ZA

Technical data

Vehicle
BrandFord
Car modelTourneo
Engine1.5 diesel 99PS
Power99.0PS / 72.8kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberFV61-14C204-BFB
Software number10SW015461
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd67b19a125a78db9
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW027110Offset in the file: 0x02001A
Vehicle maker's hardware numberGV61-12A650-RBOffset in the file: 0x00FD30
Software / calibrationF1F1-12B684-ZAOffset in the file: 0x00FD00
Engine descriptionFV61-14C204-BFBOffset in the file: 0x1FFF02
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C545///Offset in the file: 0x298FAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FV61-14C204-BFB and software number 10SW015461. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
FV61-14C204-AZF10SW061896Ford Tourneo
FV61-14C204-BBB1037559176Ford Fiesta
FV61-14C204-BFA10SW015412Ford Transit
FV61-14C204-BFAFV61-12A650-BFAFord Transit Connect
FV61-14C204-BFB10SW027110Ford Transit Connect, Ford Transit
FV61-14C204-BFD1037557811Ford Transit
FV61-14C204-BFD10SW047126Ford Transit Connect, Ford Transit
FV61-14C204-BHC10SW038967Ford Tourneo

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page