Original file

Ford Transit Bosch EDC17C70 FV61-14C204-BLA / 10SW015414

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Transit, hardware number FV61-14C204-BLA and software number 10SW015414, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit1.5 diesel 120PS
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
FV61-14C204-BLA
Software number
10SW015414
Vehicle maker's hardware number
FV61-12A650-BLA

Technical data

Vehicle
BrandFord
Car modelTransit
Engine1.5 diesel 120PS
Power120PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberFV61-14C204-BLA
Software number10SW015414
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc6a29c9b79e50a07
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW015414Offset in the file: 0x08001A
Vehicle maker's hardware numberFV61-12A650-BLAOffset in the file: 0x16D9D5
Software / calibrationFV61-14C204-BLAOffset in the file: 0x16D9A3
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C545///Offset in the file: 0x098FAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FV61-14C204-BLA and software number 10SW015414. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page