Original file

Ford Kuga Bosch EDC17C70 GV61-14C204-LL / GV61-14C204-LL

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Kuga, hardware number GV61-14C204-LL and software number GV61-14C204-LL, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Kuga1.5 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GV61-14C204-LL
Software number
GV61-14C204-LL
Bosch part / software
10SW049236

Technical data

Vehicle
BrandFord
Car modelKuga
Engine1.5 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberGV61-14C204-LL
Software numberGV61-14C204-LL
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6f25f0ba733230fd
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW049236Offset in the file: 0x08001A
Software / calibrationGV61-14C204-LLOffset in the file: 0x16D9A3
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084C//P1084C545///Offset in the file: 0x098FAC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GV61-14C204-LL and software number GV61-14C204-LL. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
GV61-14C204-LH10SW024015Ford Kuga
GV61-14C204-LHGV61-14C204-LHFord Kuga
GV61-14C204-LL1037559213Ford Kuga
GV61-14C204-LL10SW049236Ford Kuga - Escape, Ford Kuga
GV61-14C204-SG10SW021296Ford Kuga
GV61-14C204-SG1690021296Ford Transit connect
GV61-14C204-SGF1F1-14C558-CAFord Kuga
GV61-14C204-SGGV61-14C204-SGFord Kuga 1.5 TDCI

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page