Original file

Ford Fiesta Bosch EDC17C70 HA6A-12A650-VB / 10SW021796

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Fiesta, hardware number HA6A-12A650-VB and software number 10SW021796, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Fiesta1.5 diesel
Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
HA6A-12A650-VB
Software number
10SW021796
Bosch part / software
10SW050480
Software / calibration
HA6A-12B684-MA

Technical data

Vehicle
BrandFord
Car modelFiesta
Engine1.5 diesel
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberHA6A-12A650-VB
Software number10SW021796
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFord Fiesta 1.5 TDCI US
File keycd21b771a0cc53bf
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW050480Offset in the file: 0x02001A
Vehicle maker's hardware numberHA6A-12A650-VBOffset in the file: 0x00FD30
Software / calibrationHA6A-12B684-MAOffset in the file: 0x00FD00
Engine descriptionHA6A-14C204-USOffset in the file: 0x1FFF02
Bosch project identifier (EPK)37/1/EDC17C70/57/P1485E//P1485E420///Offset in the file: 0x280130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HA6A-12A650-VB and software number 10SW021796. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page