Original file

Ford Fiesta Bosch EDC17C70 J1B1-14C204-ABF / J1B1-14C204-ABF

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Fiesta, hardware number J1B1-14C204-ABF and software number J1B1-14C204-ABF, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Fiesta1.5 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
J1B1-14C204-ABF
Software number
J1B1-14C204-ABF
Bosch part / software
10SW040636

Technical data

Vehicle
BrandFord
Car modelFiesta
Engine1.5 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJ1B1-14C204-ABF
Software numberJ1B1-14C204-ABF
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycd385f490bf8b65d
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW040636Offset in the file: 0x08001A
Software / calibrationJ1B1-14C204-ABFOffset in the file: 0x18A4EC
Bosch project identifier (EPK)37/1/EDC17C70/57/P1485F//P1485F500///Offset in the file: 0x080130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number J1B1-14C204-ABF and software number J1B1-14C204-ABF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page