Original file

Bosch EDC17C70 J1DA-14C204-JL / 10SW035483

An original (stock) flash read of the Bosch EDC17C70 control unit, hardware number J1DA-14C204-JL and software number 10SW035483, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
J1DA-14C204-JL
Software number
10SW035483
Bosch part / software
10SW092032
Software / calibration
P1762C400

Technical data

Vehicle
Enginediesel
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJ1DA-14C204-JL
Software number10SW035483
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfb1ccd1098d1ccef
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW092032Offset in the file: 0x02001A
Software / calibrationP1762C400Offset in the file: 0x280130
Bosch project identifier (EPK)36/1/EDC17C70/57/P1762//P1762C400///Offset in the file: 0x280130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number J1DA-14C204-JL and software number 10SW035483. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page