Original file

Ford Mondeo Bosch EDC17C70 JS7A-14C204-BKB / 1037557903

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Mondeo, hardware number JS7A-14C204-BKB and software number 1037557903, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo1.5 diesel 120PS
Control unit
Bosch EDC17C70
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
JS7A-14C204-BKB
Software number
1037557903
Bosch part / software
10SW046749
Vehicle maker's hardware number
FS7A-12A650-EBA
Software / calibration
F1F1-12B684-ZA

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine1.5 diesel 120PS
Power120PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJS7A-14C204-BKB
Software number1037557903
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key08b2c88e14026dac
Identification read from the file
ECU nameEDC17C70
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW046749Offset in the file: 0x02001A
Vehicle maker's hardware numberFS7A-12A650-EBAOffset in the file: 0x00FD30
Software / calibrationF1F1-12B684-ZAOffset in the file: 0x00FD00
Engine descriptionJS7A-14C204-BKBOffset in the file: 0x1FFF02
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084D//P1084D731///Offset in the file: 0x29A050

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JS7A-14C204-BKB and software number 1037557903. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page