Original file

Ford Mondeo Bosch EDC17C70 JS7A-14C204-BKB / 10SW046749

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Mondeo, hardware number JS7A-14C204-BKB and software number 10SW046749, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
JS7A-14C204-BKB
Software number
10SW046749
Vehicle maker's hardware number
JS7A-12A650-BKB

Technical data

Vehicle
BrandFord
Car modelMondeo
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJS7A-14C204-BKB
Software number10SW046749
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7591f9ca7b9176be
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW046749Offset in the file: 0x28001A
Vehicle maker's hardware numberJS7A-12A650-BKBOffset in the file: 0x3799ED
Software / calibrationJS7A-14C204-BKBOffset in the file: 0x3799BB
Bosch project identifier (EPK)37/1/EDC17C70/57/P1084D//P1084D731///Offset in the file: 0x29A050

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JS7A-14C204-BKB and software number 10SW046749. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page