Original file

Ford Courier Bosch EDC17C70 JT71-12A650-AFC / 10SW066540

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Courier, hardware number JT71-12A650-AFC and software number 10SW066540, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Courierdiesel
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
JT71-12A650-AFC
Software number
10SW066540
Software / calibration
JT71-14C204-AFC

Technical data

Vehicle
BrandFord
Car modelCourier
Enginediesel
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJT71-12A650-AFC
Software number10SW066540
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydfd57fde660b7768
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW066540Offset in the file: 0x28001A
Vehicle maker's hardware numberJT71-12A650-AFCOffset in the file: 0x38B3CE
Software / calibrationJT71-14C204-AFCOffset in the file: 0x38B429
Bosch project identifier (EPK)36/1/EDC17C70/57/P1691//P1691B410///Offset in the file: 0x280130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JT71-12A650-AFC and software number 10SW066540. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page