Original file

Ford Tourneo Bosch EDC17C70 JT71-12A650-GF / 10SW040320

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Tourneo, hardware number JT71-12A650-GF and software number 10SW040320, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo1.5 diesel 100PS
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JT71-12A650-GF
Software number
10SW040320
Software / calibration
JT71-14C204-GF

Technical data

Vehicle
BrandFord
Car modelTourneo
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJT71-12A650-GF
Software number10SW040320
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key593aa250645c5da5
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW040320Offset in the file: 0x08001A
Vehicle maker's hardware numberJT71-12A650-GFOffset in the file: 0x181722
Software / calibrationJT71-14C204-GFOffset in the file: 0x181754
Bosch project identifier (EPK)36/1/EDC17C70/57/P1691//P1691B400///Offset in the file: 0x080130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JT71-12A650-GF and software number 10SW040320. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
JT71-12A650-FHJT71-14C204-FHFord Transit Courier
JT71-12A650-FK10SW056452Ford Transit Connect
JT71-12A650-FL10SW062970Ford Transit
JT71-12A650-FN10SW071062Ford Transit 1.5TDCI
JT71-12A650-GFJT71-14C625-DFFord Transit Courier 1.5 TDCI
JT71-12A650-GG10SW044609Ford Transit
JT71-12A650-GHJT71-14C204-GHFord Transit Courier
JT71-12A650-GK10SW056462Ford Transit

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page