Original file

Ford Transit Connect Bosch EDC17C70 JT71-12A650-GR / JT71-14C204-GR

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Transit Connect, hardware number JT71-12A650-GR and software number JT71-14C204-GR, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Connect1.5 diesel · 100.0PS / 73.5kW
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JT71-12A650-GR
Software number
JT71-14C204-GR
Bosch part / software
10SW087680

Technical data

Vehicle
BrandFord
Car modelTransit Connect
Engine1.5 diesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJT71-12A650-GR
Software numberJT71-14C204-GR
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya71939a13e976f87
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW087680Offset in the file: 0x08001A
Vehicle maker's hardware numberJT71-12A650-GROffset in the file: 0x18B706
Software / calibrationJT71-14C204-GROffset in the file: 0x18B761
Bosch project identifier (EPK)36/1/EDC17C70/57/P1691//P1691B420///Offset in the file: 0x080130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JT71-12A650-GR and software number JT71-14C204-GR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

HardwareSoftwareVehicles
JT71-12A650-GKJT71-14C204-GKFord Transit, Ford Transit Connect
JT71-12A650-GMJT71-14C204-GMFord Transit
JT71-12A650-GN10SW071063Ford Transit
JT71-12A650-GNJT71-14C204-GNFord Tourneo Courier
JT71-12A650-HKJT71-14C204-HKFord Tourneo
JT71-12A650-UA10SW056192Ford Tourneo Courier
JT71-12A650-UC10SW066541Ford Tourneo
JT71-14C204-AFF10SW056166

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page