Original file
Ford Transit Connect Bosch EDC17C70 JT71-14C204-GR / JT71-14C204-GR
An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Transit Connect, hardware number JT71-14C204-GR and software number JT71-14C204-GR, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Transit Connect1.5 diesel · 100.0PS / 73.5kW
- Control unit
- Bosch EDC17C70
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- JT71-14C204-GR
- Software number
- JT71-14C204-GR
- Bosch part / software
- 10SW087680
- Vehicle maker's hardware number
- JT71-12A650-GE
- Software / calibration
- HA6A-12B684-MA
Technical data
| Brand | Ford |
|---|---|
| Car model | Transit Connect |
| Engine | 1.5 diesel |
| Power | 100.0PS / 73.5kW |
| Control unit | Bosch EDC17C70 |
|---|---|
| ECU maker | Bosch |
| Hardware number | JT71-14C204-GR |
| Software number | JT71-14C204-GR |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | c84e3c1c0ce957f3 |
| ECU name | EDC17C70 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW087680 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | JT71-12A650-GE | Offset in the file: 0x00FD30 |
| Software / calibration | HA6A-12B684-MA | Offset in the file: 0x00FD00 |
| Engine description | JT71-14C204-GR | Offset in the file: 0x1FFF02 |
| Bosch project identifier (EPK) | 36/1/EDC17C70/57/P1691//P1691B420/// | Offset in the file: 0x280130 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number JT71-14C204-GR and software number JT71-14C204-GR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C70
| Hardware | Software | Vehicles |
|---|---|---|
| JT71-14C204-AFF | 10SW056166 | |
| JT71-14C204-FK | 10SW037537 | Ford Transit |
| JT71-14C204-GH | JT71-14C204-GH | Ford Transit Courier |
| JT71-14C204-GM | 10SW037538 | Ford Transit |
| JV6A-12A650-CGA | 10SW058859 | Ford Kuga |
| JV6A-12A650-CGA | DSJ1DA-12A650-JAC | Ford Focus 1.5 TDCI |
| JV6A-12A650-CGA | JV6A-14C204-CGA | Ford Kuga |
| JV6A-12A650-CGB | JV6A-14C204-CGB | Ford Kuga |