Original file

Ford Kuga Bosch EDC17C70 JV6A-12A650-CGA / 10SW058859

An original (stock) flash read of the Bosch EDC17C70 control unit, fitted in Ford Kuga, hardware number JV6A-12A650-CGA and software number 10SW058859, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Kuga1.5 diesel 120PS
Control unit
Bosch EDC17C70
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
JV6A-12A650-CGA
Software number
10SW058859
Software / calibration
JV6A-14C204-CGA

Technical data

Vehicle
BrandFord
Car modelKuga
Engine1.5 diesel 120PS
Power120PS / 88.3kW
Control unit
Control unitBosch EDC17C70
ECU makerBosch
Hardware numberJV6A-12A650-CGA
Software number10SW058859
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key687af5f8020a08d4
Identification read from the file
ECU nameEDC17C70
Read typeCalibration only (data set)
ProcessorTC1793
Bosch part / software10SW058859Offset in the file: 0x28001A
Vehicle maker's hardware numberJV6A-12A650-CGAOffset in the file: 0x384B92
Software / calibrationJV6A-14C204-CGAOffset in the file: 0x384BC4
Bosch project identifier (EPK)36/1/EDC17C70/57/P1762//P1762C300///Offset in the file: 0x280130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C70 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JV6A-12A650-CGA and software number 10SW058859. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C70

Bosch EDC17C70 original files

The Bosch EDC17C70 unit page