Original file

Audi A4 2.0 TDI Bosch EDC17C74 04L906026AA / 10SW014077 1274L8KF

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4 2.0 TDI, hardware number 04L906026AA and software number 10SW014077 1274L8KF, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0 TDI2.0 diesel 150.0PS / 110.3kW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04L906026AA
Software number
10SW014077 1274L8KF
Bosch part / software
10SW014077
Vehicle maker's hardware number
04L907309L

Technical data

Vehicle
BrandAudi
Car modelA4 2.0 TDI
Engine2.0 diesel 150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026AA
Software number10SW014077 1274L8KF
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybc47b23da75508e7
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software10SW014077Offset in the file: 0x10301A
Vehicle maker's hardware number04L907309LOffset in the file: 0x1C3394
Software / calibration04L906026AA · version 3927Offset in the file: 0x1C33AE
Bosch project identifier (EPK)436/1/EDC17C74/5/P1274//C1274DL8KF///Offset in the file: 0x10307B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026AA and software number 10SW014077 1274L8KF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L90602610SW009685Audi pcmflash
04L906026A04L906026AAudi pcmflash
04L906026AA04L906026AAAudi A4
04L906026AA10SW014077Audi A4
04L906026AB014080Audi A4 2.0 TDI
04L906026AB10SW014080Audi A4
04L906026AC005333Audi A5 2.0 TDI, Audi 2.0 TDI
04L906026AC011496Audi A4 2.0 TDI

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page