Original file

Seat Ateca Bosch EDC17C74 04L906026BC / 04L906026BC

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat Ateca, hardware number 04L906026BC and software number 04L906026BC, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ateca2.0 diesel 110KW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026BC
Software number
04L906026BC
Bosch part / software
10SW009240
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandSeat
Car modelAteca
Engine2.0 diesel 110KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026BC
Software number04L906026BC
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2ed7b3e83810969c
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW009240Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309POffset in the file: 0x3C5968
Software / calibration04L906026BC · version 3191Offset in the file: 0x3C5982
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8KC///Offset in the file: 0x04CFEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026BC and software number 04L906026BC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat AtecaFlash4,096.00 KB€15Add to cart

All reads of 04L906026BC / 04L906026BC

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026AS1037552576Volkswagen Passat, Volkswagen Passat 2.0 TDI, Volkswagen Passat 2.0 TDI CR
04L906026AT1037550093Volkswagen Passat, Volkswagen Passat 2.0 TDI, Volkswagen pcmflash
04L906026AT1037552577Volkswagen Passat, Volkswagen Passat 2.0 TDI, Volkswagen pcmflash
04L906026BC009240Seat Ateca 2.0 TDI, Seat Altea 1.9 TDI PD
04L906026BC1037552581Seat Ateca, Seat Tiguan 2.0 TDI, Seat Tiguan
04L906026BC10SW005683Volkswagen pcmflash, Audi, Seat
04L906026BC10SW007522Seat
04L906026BC10SW009240Volkswagen pcmflash, Volkswagen Ateca, Seat

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page