Original file

Seat Ateca 2.0 TDI Bosch EDC17C74 04L906026BH / 009236

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat Ateca 2.0 TDI, hardware number 04L906026BH and software number 009236, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ateca 2.0 TDI2.0 diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04L906026BH
Software number
009236
Bosch part / software
10SW009236
Vehicle maker's hardware number
04L907309P

Technical data

Vehicle
BrandSeat
Car modelAteca 2.0 TDI
Engine2.0 diesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026BH
Software number009236
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key28b1d0609c1a084a
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software10SW009236Offset in the file: 0x10301A
Vehicle maker's hardware number04L907309POffset in the file: 0x1C5968
Software / calibration04L906026BH · version 3192Offset in the file: 0x1C5982
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8KC///Offset in the file: 0x1047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026BH and software number 009236. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026BF10SW000050Volkswagen pcmflash, Škoda
04L906026BG04L906026BGAudi Q2, Audi Golf, Volkswagen
04L906026BG1037552581Volkswagen T-ROC
04L906026BG10SW013914Škoda Q2, Škoda KAROQ, Škoda Octavia 3
04L906026BH10SW011195Seat Ateca
04L906026BJ04L906026BJVolkswagen Golf
04L906026BJ10SW018133Seat pcmflash, Seat ATECA S1 VM, Volkswagen
04L906026BJ10SW070540

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page