Original file

Audi A3 2.0 TDI Bosch EDC17C74 04L906026BN / 1037551549

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A3 2.0 TDI, hardware number 04L906026BN and software number 1037551549, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 2.0 TDI2.0 diesel 149.6PS / 110.0kW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04L906026BN
Software number
1037551549
Vehicle maker's hardware number
04L907309R

Technical data

Vehicle
BrandAudi
Car modelA3 2.0 TDI
Engine2.0 diesel 149.6PS / 110.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026BN
Software number1037551549
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key60eb931a37c3d87f
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software1037551549Offset in the file: 0x10301A
Vehicle maker's hardware number04L907309ROffset in the file: 0x1BEB48
Software / calibration04L906026BN · version 0880Offset in the file: 0x1BEB62
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DT8F2///Offset in the file: 0x1047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026BN and software number 1037551549. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026BJ10SW070540
04L906026BN04L906026BNAudi A3, Audi Leon, Audi Golf
04L906026BN062196Seat Leon 2.0 TDI, Seat Leon 2.0 TDI CR EU6
04L906026BN077461Audi A3 2.0 TDI
04L906026BN1037552303Volkswagen Golf, Volkswagen Octavia 3, Škoda
04L906026BN1037554929Seat Golf, Seat A3, Seat Octavia 3
04L906026BN10SW062196Škoda Octavia 3, Škoda Octavia Combi
04L906026BN10SW077461Škoda

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page