Original file

Seat Bosch EDC17C74 04L906026BQ / 10SW076002

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat, hardware number 04L906026BQ and software number 10SW076002, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seatdiesel · 150PS / 110.3kW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026BQ
Software number
10SW076002
Vehicle maker's hardware number
04L907309R

Technical data

Vehicle
BrandSeat
Enginediesel
Displacement2.0
Power150PS / 110.3kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026BQ
Software number10SW076002
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key55fd40b4a0f6912c
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW076002Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309ROffset in the file: 0x3D21C4
Software / calibration04L906026BQ · version 7762Offset in the file: 0x3D21DE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DT8KI///Offset in the file: 0x049E84

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026BQ and software number 10SW076002. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen GolfFlash4,256.00 KB€15Add to cart
Seat LeonFlash · From the file name: L533CC02,048.00 KB€15Add to cart
Audi A3Flash4,096.00 KB€15Add to cart

All reads of 04L906026BQ / 10SW076002

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026BP10SW077462Seat
04L906026BQ04L906026BQVolkswagen Golf
04L906026BQ1037552303Seat Leon
04L906026BQ1037554932Škoda Octavia 3, Škoda Octavia 2, Škoda Octavia 3 2.0 TDI CR
04L906026BR04L906026BRVolkswagen Golf
04L906026BR071748Seat Leon 2.0 TDI, Seat Octavia 3 2.0 TDI, Seat Passat 2.0 TDI
04L906026BR1037552303Volkswagen Golf
04L906026BR1037555403Škoda Octavia 3, Škoda Golf, Škoda Leon

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page