Original file

Seat Bosch EDC17C74 04L906026CA / 10SW093509

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Seat, hardware number 04L906026CA and software number 10SW093509, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat1.6 diesel 110PS
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026CA
Software number
10SW093509
Vehicle maker's hardware number
04L907309R

Technical data

Vehicle
BrandSeat
Engine1.6 diesel 110PS
Power110.1PS / 81.0kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026CA
Software number10SW093509
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key180df121147eb016
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW093509Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309ROffset in the file: 0x3D21C4
Software / calibration04L906026CA · version 7827Offset in the file: 0x3D21DE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DT8KI///Offset in the file: 0x049E84

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026CA and software number 10SW093509. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026CA1037552303Audi Octavia 3, Audi A3 1.6 TDI CR, Audi Golf 1.6 TDI CR
04L906026CA10SW000862Audi A3, Volkswagen
04L906026CA10SW006815Škoda Octavia 3
04L906026CA10SW008789Audi A3
04L906026CC013880Audi A4 2.0 TDI, Audi Q5 2.0 TDI CR
04L906026CC041295Audi A4 2.0 TDI
04L906026CC04L906026CCAudi Q5
04L906026CC04L907309LAudi Q5

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page