Original file

Škoda Superb 3 Bosch EDC17C74 04L906026DR / 04L906026DR

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Škoda Superb 3, hardware number 04L906026DR and software number 04L906026DR, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 32.0 diesel 140KW
Control unit
Bosch EDC17C74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906026DR
Software number
04L906026DR
Bosch part / software
10SW008233
Vehicle maker's hardware number
04L907309M

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 3
Engine2.0 diesel 140KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026DR
Software number04L906026DR
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key155802545599c5a8
Identification read from the file
ECU nameEDC17C74
Read typeFull read (boot area included)
Bosch part / software10SW008233Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309MOffset in the file: 0x3B9FF8
Software / calibration04L906026DR · version 1935Offset in the file: 0x3BA012
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8AC///Offset in the file: 0x04E854

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026DR and software number 04L906026DR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026DP1037550813Volkswagen Passat
04L906026DP1037552579Volkswagen Passat
04L906026DP10SW008211Volkswagen pcmflash, Volkswagen Passat
04L906026DQ10SW008215Volkswagen pcmflash, Volkswagen Passat
04L906026DR1037537666Škoda Superb 3 2.0 TDI, Škoda Passat, Volkswagen
04L906026DR1037551685Volkswagen Passat, Volkswagen pcmflash
04L906026DR10SW008233Volkswagen Passat, Volkswagen pcmflash
04L906026DS008214Audi A6 2.0 TDI, Audi Passat 2.0 TDI, Volkswagen

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page