Original file

Škoda Superb 3 Bosch EDC17C74 04L906026FM / 04L906026FM

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Škoda Superb 3, hardware number 04L906026FM and software number 04L906026FM, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 32.0 diesel 140KW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04L906026FM
Software number
04L906026FM
Bosch part / software
10SW008556
Vehicle maker's hardware number
04L907309M

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 3
Engine2.0 diesel 140KW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026FM
Software number04L906026FM
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file name914
File key122d3efb140b5095
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software10SW008556Offset in the file: 0x10301A
Vehicle maker's hardware number04L907309MOffset in the file: 0x1C5130
Software / calibration04L906026FM · version 1938Offset in the file: 0x1C514A
Bosch project identifier (EPK)36/1/EDC17C74/5/P1274//C1274DN8K3///Offset in the file: 0x1047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026FM and software number 04L906026FM. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda Superb 3Flash4,096.00 KB€15Add to cart
Volkswagen GolfFlash4,096.00 KB€15Add to cart

All reads of 04L906026FM / 04L906026FM

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026FJ10SW007378Volkswagen pcmflash
04L906026FK10SW007383Volkswagen pcmflash
04L906026FL10SW007381Volkswagen pcmflash
04L906026FM008556Škoda Superb 3 2.0 TDI
04L906026FM1037552579Škoda Superb 3
04L906026FM1037555443Volkswagen Passat 2.0 TDI, Volkswagen pcmflash, Volkswagen Superb 3
04L906026FM10SW008556Volkswagen pcmflash, Volkswagen Passat
04L906026FN04L906026FNŠkoda Superb 3, Škoda pcmflash, Škoda A3

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page