Original file

Audi A4 2.0 TDI Bosch EDC17C74 04L906026FR / 10SW010621 1274L8KD

An original (stock) flash read of the Bosch EDC17C74 control unit, fitted in Audi A4 2.0 TDI, hardware number 04L906026FR and software number 10SW010621 1274L8KD, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0 TDI2.0 diesel 150.0PS / 110.3kW
Control unit
Bosch EDC17C74
Read type
Calibration only (data set)
File
12,288.00 KB · Flash
Hardware number
04L906026FR
Software number
10SW010621 1274L8KD
Bosch part / software
10SW010621
Vehicle maker's hardware number
04L907309L

Technical data

Vehicle
BrandAudi
Car modelA4 2.0 TDI
Engine2.0 diesel 150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C74
ECU makerBosch
Hardware number04L906026FR
Software number10SW010621 1274L8KD
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File keybe22e1dd190c02bf
Identification read from the file
ECU nameEDC17C74
Read typeCalibration only (data set)
Bosch part / software10SW010621Offset in the file: 0x6B301A
Vehicle maker's hardware number04L907309LOffset in the file: 0x77417C
Software / calibration04L906026FR · version 3450Offset in the file: 0x774196
Bosch project identifier (EPK)736/1/EDC17C74/5/P1274//C1274DL8KD///Offset in the file: 0x6B307B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906026FR and software number 10SW010621 1274L8KD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C74

HardwareSoftwareVehicles
04L906026FR04L906026FRAudi A4
04L906026FR1037552578Audi A4
04L906026FR10SW005331Audi A4
04L906026FR10SW010621Audi A4, Audi pcmflash
04L906026FS04L906026FSAudi A4, Audi B9-FL
04L906026FS04L907309LAudi A4
04L906026FS058544Audi A4 2.0 TDI, Audi A4 2.0
04L906026FS1037552578Audi A4, Audi A6 2.0 TDI CR DPF

Bosch EDC17C74 original files

The Bosch EDC17C74 unit page